GNS Piling Rig
GNS Piling rig has capacity of drilling 1200 mm diameter by DTH method upto a depth of 15 meters, GNS POLE DRILL is widely used in oil and gas for concrete poles, pilot holes and other special application in the construction sector. The key specialty of the rig is all in one prime mover which is either a Truck or Trailer.
TECH SPEC - GNS Piling Rig
APPLICATION | Concrete PilingPole ErectionConductor casing in Oil & Gas |
DRILLING METHOD | DTH |
DIAMETER | 17″ – 47″ dia bore holes |
DEPTH | 15 m |
FORMATION | Hard |
PRIME MOVER | Power for the hydraulics taken from suitable deck engine |
ROTARY HEAD TORQUE | 14000 Nm |
ROTARY HEAD SPEED | 0 – 50 rpm |
PULL UP FORCE |
24000 kg |
PULL DOWN FORCE |
11500 kg |
PULL UP SPEED |
20 m/min |
PULL DOWN SPEED |
30 m/min |
JACKS |
Six Box type Hydraulic jacks |
MAIN WINCH CAPACITY |
10 Ton |
COMPRESSOR |
1200 cfm – 330 psi (2 qty) on board |
TRUCK |
Renault 6×4 / 8×4Min 38 GVW Truck |