GNS BH 165
BH 15 100 is a wise choice of blast hole rig for small scale mines with 100 – 165 mm diameter drilling. With 6000 kg pull down, 4 meter single pass depth and HVAC Cabin with all mining requirements fulfilled.
Previous
Next
TECH SPECS - GNS BH 165
APPLICATION | Drilling for blasting in mines |
DRILING METHOD | DTH |
DIAMETER | 4″ – 6 ½” |
FORMATION | Hard |
SINGLE/MULTI PASS | Multi Pass |
SINGLE PASS DEPTH | 4 m |
PRIME MOVER | Power for the Hydraulic is taken from the suitable Deck Engine |
ROTARY HEAD TORQUE | 3300 Nm |
ROTARY HEAD SPEED | 0 – 100 rpm |
PULL UP FORCE | 6000 kg |
PULL DOWN FORCE | 6000 kg |
PULL UP SPEED | 20 m/min |
PULL DOWN SPEED | 20 m/min |
JACKS | Four Box mounted hydraulic jacks |
WATER PUMP | Maximum Flow – 80 lpmMaximum Pressure – 40 kg/sq.cm |
UNDERCARRIAGE | 18 ton Crawler |
TRAMMING SPEED | 1.5 km/hr |
COMPRESSOR | 600 cfm – 200 psi |
OPTIONAL ATTACHMENTS | Mine safety featuresCentralized lubrication systemFire suppression systemHydraulic power from compressor engine |